T-99
Description
T-99 is a specialty high temperature heat transfer compound formulated to provide exceptional thermal stability and superior bonding strength up to 1000°C (1832°F). Unlike other grades of heat transfer compounds, it is also electrically non-conductive. It is supplied ready to use and may be applied by hand troweling to fill TFK channels.
T-99 resists thermal and mechanical shock and provides an efficient heat transfer rate with a high bond strength. In order to promote good surface wetting and ensure contact, the surfaces of traced valves, pumps and other equipment must be prepared just as though a paint or primer is to be applied. Oil, grease, dirt, rust, scale, etc., must be removed. The use of solvents and emulsions along with scraping, chipping and wire brushing are common pre-treatment techniques for steel surfaces.
Features
- Thermally stable at continuous temperature exposures up to 1000°C (1832°F)
- Electrically non-conductive
- Exceptional bond strength to resist thermal expansion and contraction
- High shock resistance when exposed to extensive thermal cycling
Downloads & Videos
PRODUCT INFO
- T-99 Product Specifications
- Heat Transfer Compounds Product Selection Chart
- TFK Channels Product Specification
- Safety Data Sheets
INSTALL INSTRUCTIONS
Specifications
Container sizes 3.8 & 7.6-liter (1 & 2 gallon) pails Maximum exposure temperature 1000°C (1832°F) Minimum exposure temperature -196°C (-320°F) Minimum installation temperature 0°C (32°F)
- Cat #
- Width Height Length Thickness Material
- TFK-4
- 1.18 (30) .84 (21) 4 (1.2) .04 (1.0) Rigid Galvanized
- TFK-6
- 2.00 (51) 1.00 (25) 4 (1.2) .03 (0.7) Flexible Stainless
- TFK-7
- 1.62 (41) 1.22 (31) 4 (1.2) .04 (1.0) Rigid Galvanized
- TFK-8
- 0.66 (17) .75 (19) 4 (1.2) .04 (1.0) Rigid Galvanized
- TFK-9
- 2.50 (64) 1.75 (44) 4 (1.2) .06 (1.6) Rigid Galvanized
