TubeTrace with BSX™
Electrically Heated Tubing Bundles
Description
TubeTrace, with “cut-to-length” BSX self-regulating heat tracing, is designed to provide freeze protection or temperature maintenance for tubing where no “steam out” of the tubing is possible. BSX withstands temperature exposures of 85°C (185°F).
Self-regulating BSX heat tracing
- Varies in response to the surrounding conditions along the entire length of a circuit.
- Lower risk of overheating the tube or product.
- Installed cost is lower because “cut-to-length” BSX makes end connections easy with minimal waste
Features
- Freeze protection
- Low process temperature maintenance
- No steam clean
- Certified for use in ordinary (nonclassified) areas and in potentially explosive atmospheres
Downloads & Videos
Product Info
- TubeTrace BSX Product Specification
- TubeTrace and ThermoTube System Accessories Product Specification
- Terminator/FAK Connection Kits
- Heated Instrument Tubing Specification
- Tubing Bundles Introduction
- Safety Data Sheets
Install Instructions
- TubeTrace Installation Procedures
- Terminator ZP/FAK-1 Installation
- Terminator ZT/FAK-4L Installation
- FAK-7 Seal Kit Installation
Videos
Specifications
| Tube temperature range | 5 °C to 65°C (40°F to 150°F) |
| Max Exposure Temp Power Off | 85°C (185°F) |
| Power Options | W/m @10°C 9, 15, 25, 32 W/ft @50°F 3, 5, 8, 10 |
| Voltage Range | 100-277 Vac |
| T-Rating | T6 | T5 |
| Minimum installation temperature | -40°C (-40°F) |
| T-rating | 10, 16, 26 W/m (3, 5, 8 w/ft) T6 85°C( 185°F) 33 W/m (10 w/ft) T5 100°C (212°F) |
